Healthcare buildings — hospitals, clinics, primary care centres, diagnostic laboratories — have a demand profile that no other construction sector shares in its entirety. Continuous operation with no possibility of interruption, strict electrostatic discharge control in environments with critical medical equipment, maximum-demand hygiene and disinfection protocols, and the need to adapt spaces to the constant evolution of healthcare technology — all of this in an environment where any infrastructure failure can have direct consequences for patient safety.
In that context, raised access flooring is not simply another building component. It is part of the infrastructure that protects lives.
Operational continuity: a non-negotiable requirement
A hospital never closes. Emergency departments, operating theatres, ICUs and control rooms operate 24 hours a day, 365 days a year. Any intervention in the building’s technical infrastructure — from an electrical fault to an update of medical data systems — must be resolved without interrupting clinical activity.
The GAMAFLOR underfloor plenum organises all installations — electricity, data, medical gases, HVAC, nurse call systems — in an accessible and independent way. Panels are extracted individually in seconds, without special tools and without affecting adjacent panels, allowing maintenance and installation updates without stopping building activity.
In a healthcare environment, this capacity for uninterrupted intervention is not an operational advantage — it is a safety requirement.
Electrostatic control: protecting patients and equipment
Healthcare environments concentrate an extraordinary density of critical electronic equipment — patient monitors, diagnostic imaging equipment, life support systems, digital medical record servers. In these environments, an uncontrolled electrostatic discharge can compromise the performance of equipment whose failure has direct consequences for patient safety.
GAMAFLOR systems incorporate antistatic properties integrated into the structure, dissipating electrostatic charges generated in the subfloor and conducting them to the most favourable earth grounding points in the building. For the most demanding zones — operating theatres, ICU rooms, diagnostic laboratories — conductive PVC finishes offer the highest level of ESD control, forming part of the building’s electrostatic protection strategy from the design stage.
Hygiene and disinfection: the finish as a clinical decision
In healthcare environments, the floor finish is not an aesthetic decision — it is a clinical one. Cleaning and disinfection protocols are intensive, frequent and use chemical agents that an inadequate finish cannot withstand over time.
GAMAFLOR finishes for healthcare environments respond to these requirements. HPV Lider offers a smooth surface, without visible joints thanks to Sovereign technology, resistant to hospital disinfectants and easy to maintain — reducing the risk of bacterial accumulation and facilitating cleaning protocols. Conductive PVC adds ESD control to these properties for the most clinically sensitive areas.
A1 fire classification: maximum structural safety
Healthcare buildings are subject to the most demanding fire safety regulations. In environments where the evacuation of patients with limited mobility must be contemplated from the design stage, the fire classification of the floor system admits no compromise.
The GAMAFLOR Full Steel system — with A1 fire classification, the highest available — is the reference solution for the technical and most demanding areas of healthcare buildings, guaranteeing that the floor system does not contribute in any way to fire propagation.
Adaptability to healthcare technology evolution
Healthcare technology evolves at a speed that no building can fully anticipate at the design stage. New diagnostic equipment, digital medical record systems, surgical robots, telemedicine infrastructure — each new technology requires new electrical, data and in many cases specific HVAC installations.
A well-specified raised access floor system allows the hospital to incorporate these technologies without structural works — redistributing installations, updating data networks and reconfiguring HVAC zone by zone, without interrupting clinical activity and without generating demolition waste.
In a sector where healthcare technology is constantly renewed, this adaptability is not a luxury — it is an operational necessity.
A decision made at design stage
The specification of raised access flooring in a healthcare building must be made at the design stage — not on site. Plenum height, ESD strategy by zone, required fire classification, finish selection according to the clinical use of each space and the definition of the maintenance strategy are variables that must be defined before construction begins, in coordination with the medical and facilities management teams of the centre.
At Polygroup, we work alongside architects, engineers and developers in the healthcare sector from the earliest stages of each project, ensuring that the floor solution is technically and clinically optimised before the first panel is installed.
Working on a hospital or healthcare infrastructure project? Our technical team can support you from the very first sketch. Contact us.
