Raised access floor is conceived as a unitary system where each component is key concerned with the optimal performance, warranty, stability, acoustic capacity, and service life of the assembly.
Raised floor structure GAMAFLOR consists of steel pedestals and stringers combined with each other ensuring the highest stability performance in the event of lateral movement, rolling loads, or even earthquakes.
Raised access floor pedestal is designed as a readily adaptable structural component to the full range of GAMAFLOR access flooring systems by the double-head concept or reversible mode assembly. Each pedestal consists of two steel plates welded to an extendable piece tube and screw; both pieces are bolted one to each other and locked with double security nut.
The structure is complemented with acoustically insulated steel stringers used to connect access floor and pedestal together (clipped or screwed), thus providing lateral stability to the system and access floor panels support.
GAMAFLOR raised access floor structure is ready to dissipate electrostatic charges generated in the subfloor and conducts them to the most favorable earth grounding points of the building. This process contributes to clean electrostatic charges generated in the building as well as a raised access floor free whiskers zinc.
PEDESTAL HEAD:
Circular steel plate of 90 mm size and 3 mm thickness with conductive and shock –absorbing PVC cup gasket
TRIPLE THREADING SYSTEM:
Head and base totally threaded rod bolted between them with two security nuts to prevent movement and warranty the levelling
PEDESTAL BASE:
Steel squared plate of 76 mm size and 3 mm thickness
STRINGER:
Raised access floor stringer with rubber acoustic insulation clipped on pedestal head
PEDESTAL HEAD:
Circular steel plate of 90 mm size and 3 mm thickness with conductive and shock –absorbing PVC cup gasket.
TRIPLE THREADING SYSTEM:
Head and base totally threaded rod bolted between them with two security nuts to prevent movement and warranty the levelling.
PEDESTAL BASE:
Circular steel plate of 90 mm size and 3 mm thickness.
STRINGER:
Raised access floor reinforced stringer with rubber acoustic insulation bolted to pedestal head.
HEAD:
Circular steel plate of 90 mm size and 3 mm thickness with conductive and shock –absorbing PVC cup gasket.
TRIPLE THREADING SYSTEM:
Head and base totally threaded rod bolted between them with two security locking nuts to prevent movement and warranty the levelling.
PEDESTAL BASE:
Steel squared plate of 127X127 mm size and 3 mm thickness. Incorporate a welded tube of 38 mm diameter.
STRINGER:
Raised access floor stringer with rubber acoustic insulation clipped or bolted to pedestal head.
PEDESTAL HEAD:
Steel squared plate of 76 mm size and 3 mm thickness.
TRIPLE THREADING SYSTEM:
Head and base totally threaded rod bolted between them with two security nuts to prevent movement and warranty the levelling.
PEDESTAL BASE:
Circular steel plate of 90 mm size and 3 mm thickness.
STRINGER:
Raised access floor stringer with rubber acoustic insulation, its bolted to pedestal head.
HEAD:
Steel squared plate of 76 mm size and 3 mm thickness.
TRIPLE THREADING SYSTEM:
Head and base totally threaded rod bolted between them with two security locking nuts to prevent movement and warranty the levelling
PEDESTAL BASE:
Steel squared plate of 127X127 mm size and 3 mm thickness. Incorporate a welded tube of 32 mm thickness
STRINGER:
Raised access floor stringer with rubber acoustic insulation clipped or bolted to pedestal head
BRACING:
Steel tube with different lenghts according the height of pedestals, protected with black epoxi painting.
BRAKETS:
Mechanical fixation system to pedestal tube made with steel galvanized and 4 screws to install the bracings.
FOR EXTREME ANTISEISMIC AREAS (APPROVED ASCE 7-10 NORM)
WORKABLE IN ANY TYPE OF GAMAFLOR STRUCTURE
MECHANICAL FIXATION TO SUBFLOOR WITH ANCHORS
CAN BE USED FOR EVERY PEDESTAL HEIGHT
